universal ac input protections:short circuit/over load/over voltage cooling by free air convection led indicator for power on small and compact size built-in remote on-off control low profl: 23mm thickness model number output volts output amps ripple & noise min load dc volt adjust peak load volt tolerance single output lps50-3.3 3.3 volts(dc) 10 amps 50mv pk-pk 0~12amps 3~3.6volt(dc) 39.6w 3.0% lps50-5 5 volts(dc) 10 amps 50mv pk-pk 0~12amps 4.5~5.5volt(dc) 60w 3.0% lps50-12 12 volts(dc) 4.2 amps 80mv pk-pk 0~5.0amps 10.8~13.2volt(dc) 60w 2.0% lps50-15 15 volts(dc) 3.4 amps 80mv pk-pk 0~4.1amps 13.5~16.5volt(dc) 61.5w 2.0% lps50-24 24 volts(dc) 2.1 amps 80mv pk-pk 0~2.5amps 21.6~27.2volt(dc) 60w 1.0% LPS50-48 48 volts(dc) 1.1 amps 100mv pk-pk 0~1.3amps 43.2~52.8volt(dc) 62.4w 1.0% 50w single output switching power supply lps50 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
input specifications input voltage range 90 ~ 264 vac; 127~370 volts(dc) frequency range 47-63 hz inrush current, typ: (cold start) 18amps@115vac / 35amps@230vac input current, typ. 3.3volts(dc) 0.9amps@115vac / 0.6amps@230vac 5~48volts(dc) 1.2amps@115vac/ / 0.8amps@230vac leakage current < 1mamps /240vac min load see selection chart output specifications voltage and current see selection chart line regulation 1.0% load regulation 3.0%: 3.3~5volts(dc) 2.0%: 12~15volts(dc) 1.0%: 24~48volts(dc) voltage tolerance (note2) see selection chart ripple/noise (note 1) see selection chart hold up time @ fl 70ms/230vac 12ms/115vac setup, rise time @ fl 100ms, 40m/230vac 100ms, 40ms/115vac over voltage protection 3.8 ~ 4.45volt(dc): 3.3volts(dc) 5.75 ~ 6.75volt(dc): 5volts(dc) 13.8 ~ 16.2volt(dc): 12volts(dc) 17.25 ~ 20.25volt(dc): 15volts(dc) 27.6~ 32.4volt(dc): 24volts(dc) 57.6~ 67.2volt(dc): 48volts(dc) hiccup mode, auto recover over current protection 122 ~ 160% rated output power hiccup mode, auto recover dc volt adjust see selection chart peak load, 10s(note 3) see selection chart general specifications safety ul60950-1, tuv en60950-1 approved insulation resistance 100m? / 500volts(dc) emi compliance to en55022b (cispr22b) harmonic current compliance to en61000-3-2,-3 effciency, typ. 75% (lps-50-3.3) 81% (lps-50-5) 82% (lps-50-12) 84% (lps-50-15) 85% (lps-50-24) 86%(lps-50-48) isolation 3000vac input - output 1500vac input - ground 500vac output - ground ems compliance to en61000-4-2, 3, 4, 5, 6, 8, 11; env50204,en61000-6-2(en50082-2) heavy industry level, criteria a remote on/off rc+/rc-: 0~0.8volts(dc)= power on 4~10volts(dc)= power off environmental specifications oper. temperature -20c to +70c (see derate curve) storage temperature -20c to +85c, 10~95% rh relative humidity 20~90% rh non cond temperature coeffcient 0.04% / c (0-50c) mtbf 341.7khrs min,mil-hdbk-217f(25c) vibration 10~500hz, 2g10min./1cycle, period for 60min. each along x, y, z axes physical specifications size millimeters 195 x 55 x 23 inches 7.68 x 2.17 x 0.91 weight 8.47 oz (240g) note 1. ripple & noise are measured at 20mhz of bandwidth by using a 12 twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor . 2. tolerance : includes set up tolerance, line regulation and load regula - tion. 3. 33.3% duty cycle maximum within every 30 seconds. average output power should not exceed the rated power. all specifcations are typical at nominal input, full load, and 25c unless other - wise noted 50w single output switching power supply lps50 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
50w single output switching power supply lps50 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
50w single output switching power supply lps50 series www.astrodynetdi.com astrodyne usa: 1-800-823-8082 astrodyne pacific: 886-2-26983458
|